Repariere deine Sachen Community Store

Lenovo ThinkPad P1 Gen 7 LPCAMM2 Memory Replacement

Einleitung

Follow this guide to remove, replace, or upgrade the LPCAMM2 (Low Power Compression-Attached Memory Module) in your Lenovo ThinkPad P1 (Gen 7) laptop.

The ThinkPad P1 Gen 7 uses LPDDR5X memory in its LPCAMM2.

For your safety, discharge your battery below 25% before disassembling your device. This reduces the risk of a dangerous fire if the battery is accidentally damaged during the repair. If your battery is swollen, take appropriate precautions.

Was du brauchst

  1. Lenovo ThinkPad P1 Gen 7 LPCAMM2 Memory Replacement, Turn off your laptop: Schritt 1, Bild 1 von 3 Lenovo ThinkPad P1 Gen 7 LPCAMM2 Memory Replacement, Turn off your laptop: Schritt 1, Bild 2 von 3 Lenovo ThinkPad P1 Gen 7 LPCAMM2 Memory Replacement, Turn off your laptop: Schritt 1, Bild 3 von 3

    • Shut down your laptop (don't just put it in sleep mode) and disconnect all cables.

    • Flip the laptop upside-down, and rotate it so the screen hinge faces towards you.

    Übersetzen

  2. Lenovo ThinkPad P1 Gen 7 LPCAMM2 Memory Replacement, Loosen the base cover screws: Schritt 2, Bild 1 von 1

    • Use a Phillips #1 screwdriver to loosen the six captive screws securing the base cover.

    Übersetzen

  3. Lenovo ThinkPad P1 Gen 7 LPCAMM2 Memory Replacement, Loosen the base cover's left side: Schritt 3, Bild 1 von 3 Lenovo ThinkPad P1 Gen 7 LPCAMM2 Memory Replacement, Loosen the base cover's left side: Schritt 3, Bild 2 von 3 Lenovo ThinkPad P1 Gen 7 LPCAMM2 Memory Replacement, Loosen the base cover's left side: Schritt 3, Bild 3 von 3

    • Press the tip of an opening pick into the seam between the base cover and the bottom-left corner of the frame (near the screen hinge).

    • It can be tricky to get the pick into the seam for the first time. Angle the pick vertically and press down with firm pressure.

    • Pivot the pick down and slide it around the corner to release the clips.

    Übersetzen

  4. Lenovo ThinkPad P1 Gen 7 LPCAMM2 Memory Replacement: Schritt 4, Bild 1 von 3 Lenovo ThinkPad P1 Gen 7 LPCAMM2 Memory Replacement: Schritt 4, Bild 2 von 3 Lenovo ThinkPad P1 Gen 7 LPCAMM2 Memory Replacement: Schritt 4, Bild 3 von 3

    • Slide the opening pick along the left edge to release the clips securing the cover.

    Übersetzen

  5. Lenovo ThinkPad P1 Gen 7 LPCAMM2 Memory Replacement, Loosen the base cover's right side: Schritt 5, Bild 1 von 3 Lenovo ThinkPad P1 Gen 7 LPCAMM2 Memory Replacement, Loosen the base cover's right side: Schritt 5, Bild 2 von 3 Lenovo ThinkPad P1 Gen 7 LPCAMM2 Memory Replacement, Loosen the base cover's right side: Schritt 5, Bild 3 von 3

    • Press the tip of an opening pick into the seam between the base cover and the bottom-right corner of the frame (near the screen hinge).

    • Pivot the pick down and slide it around the corner to release the clips.

    Übersetzen

  6. Lenovo ThinkPad P1 Gen 7 LPCAMM2 Memory Replacement: Schritt 6, Bild 1 von 2 Lenovo ThinkPad P1 Gen 7 LPCAMM2 Memory Replacement: Schritt 6, Bild 2 von 2

    • Slide the opening pick along the right edge to release the clips securing the cover.

    Übersetzen

  7. Lenovo ThinkPad P1 Gen 7 LPCAMM2 Memory Replacement, Remove the base cover: Schritt 7, Bild 1 von 2 Lenovo ThinkPad P1 Gen 7 LPCAMM2 Memory Replacement, Remove the base cover: Schritt 7, Bild 2 von 2

    • Grasp the base cover along the screen hinge edge and pull up to loosen the cover.

    Übersetzen

  8. Lenovo ThinkPad P1 Gen 7 LPCAMM2 Memory Replacement: Schritt 8, Bild 1 von 2 Lenovo ThinkPad P1 Gen 7 LPCAMM2 Memory Replacement: Schritt 8, Bild 2 von 2

    • Lift and remove the base cover.

    Übersetzen

  10. Lenovo ThinkPad P1 Gen 7 LPCAMM2 Memory Replacement, Loosen the battery screws: Schritt 9, Bild 1 von 1

    • Use a Phillips screwdriver to loosen the six captive screws securing the battery.

    Übersetzen

  11. Lenovo ThinkPad P1 Gen 7 LPCAMM2 Memory Replacement, Remove the battery: Schritt 10, Bild 1 von 2 Lenovo ThinkPad P1 Gen 7 LPCAMM2 Memory Replacement, Remove the battery: Schritt 10, Bild 2 von 2

    • Grasp the top edge of the battery and lift to disconnect it.

    • You may feel a little resistance from the battery connector as it disconnects—that's normal.

    Übersetzen

  12. Lenovo ThinkPad P1 Gen 7 LPCAMM2 Memory Replacement: Schritt 11, Bild 1 von 2 Lenovo ThinkPad P1 Gen 7 LPCAMM2 Memory Replacement: Schritt 11, Bild 2 von 2

    • Lift and remove the battery.

    Übersetzen

  13. Lenovo ThinkPad P1 Gen 7 LPCAMM2 Memory Replacement, Loosen the LPCAMM2 screws: Schritt 12, Bild 1 von 1

    • Use a Phillips screwdriver to loosen the three captive screws securing the LPCAMM2 bracket.

    • The loosening order doesn't matter.

    Übersetzen

  14. Lenovo ThinkPad P1 Gen 7 LPCAMM2 Memory Replacement, Remove the LPCAMM2 bracket: Schritt 13, Bild 1 von 2 Lenovo ThinkPad P1 Gen 7 LPCAMM2 Memory Replacement, Remove the LPCAMM2 bracket: Schritt 13, Bild 2 von 2

    • Grab the edges of the LPCAMM2 bracket and lift straight up to remove it.

    • If your LPCAMM2 module came up with the bracket, use your fingers to gently separate it from the bracket.

    • Avoid touching the gold underside of the module—your skin oils can interfere with the electrical contacts. If you touch it by accident and plan to re-use it, clean it with high-concentration isopropyl alcohol (>90%) and a lint-free cloth before reinstalling it.

    Übersetzen

  15. Lenovo ThinkPad P1 Gen 7 LPCAMM2 Memory Replacement, Remove the LPCAMM2: Schritt 14, Bild 1 von 2 Lenovo ThinkPad P1 Gen 7 LPCAMM2 Memory Replacement, Remove the LPCAMM2: Schritt 14, Bild 2 von 2

    • Grab the edges of the LPCAMM2 and lift straight up to remove it.

    Übersetzen

  16. Lenovo ThinkPad P1 Gen 7 LPCAMM2 Memory Replacement, Check the compression connector: Schritt 15, Bild 1 von 2 Lenovo ThinkPad P1 Gen 7 LPCAMM2 Memory Replacement, Check the compression connector: Schritt 15, Bild 2 von 2

    • Follow this step if you've accidentally dislodged the compression connector or if you need to replace a damaged one.

    • Don't grab the compression connector by its delicate spring contacts. If they bend, the connector won't work properly.

    • Grasp the compression connector by the edges and lift straight up to remove it.

    • Avoid touching the exposed LPCAMM2 contact surface on the motherboard.

    • The compression connector is keyed to fit in only one direction. If it doesn't sit flush during reassembly, you may need to flip or rotate it to align the pegs with the holes in the board.

    Übersetzen

  17. Lenovo ThinkPad P1 Gen 7 LPCAMM2 Memory Replacement, Reassembly: install the LPCAMM2: Schritt 16, Bild 1 von 2 Lenovo ThinkPad P1 Gen 7 LPCAMM2 Memory Replacement, Reassembly: install the LPCAMM2: Schritt 16, Bild 2 von 2

    • The remaining steps show how to reassemble the device.

    • Grip the LPCAMM2 by its edges, and lay it on top of the compression connector.

    • Make sure the LPCAMM2 aligns with the pegs.

    Übersetzen

  18. Lenovo ThinkPad P1 Gen 7 LPCAMM2 Memory Replacement, Install the bracket: Schritt 17, Bild 1 von 2 Lenovo ThinkPad P1 Gen 7 LPCAMM2 Memory Replacement, Install the bracket: Schritt 17, Bild 2 von 2

    • Lay the bracket on top of the LPCAMM2 and align it using the screw holes.

    Übersetzen

  19. Lenovo ThinkPad P1 Gen 7 LPCAMM2 Memory Replacement, Secure the LPCAMM2: Schritt 18, Bild 1 von 3 Lenovo ThinkPad P1 Gen 7 LPCAMM2 Memory Replacement, Secure the LPCAMM2: Schritt 18, Bild 2 von 3 Lenovo ThinkPad P1 Gen 7 LPCAMM2 Memory Replacement, Secure the LPCAMM2: Schritt 18, Bild 3 von 3

    • Tighten the three LPCAMM2 screws in the order depicted on the module.

    • In this case, tighten the screws center → left → right.

    • Tighten the screws until they're snug. Don't over-tighten them, or you could damage the module.

    Übersetzen

  20. Lenovo ThinkPad P1 Gen 7 LPCAMM2 Memory Replacement, Reinstall the battery: Schritt 19, Bild 1 von 2 Lenovo ThinkPad P1 Gen 7 LPCAMM2 Memory Replacement, Reinstall the battery: Schritt 19, Bild 2 von 2

    • Align the bottom edge of the battery to its recess.

    • Lay the battery into its recess and press down gently.

    Übersetzen

  21. Lenovo ThinkPad P1 Gen 7 LPCAMM2 Memory Replacement, Secure the battery: Schritt 20, Bild 1 von 1

    • Use a Phillips screwdriver to tighten the six captive screws to re-secure the battery.

    Übersetzen

  22. Lenovo ThinkPad P1 Gen 7 LPCAMM2 Memory Replacement, Secure the base cover: Schritt 21, Bild 1 von 3 Lenovo ThinkPad P1 Gen 7 LPCAMM2 Memory Replacement, Secure the base cover: Schritt 21, Bild 2 von 3 Lenovo ThinkPad P1 Gen 7 LPCAMM2 Memory Replacement, Secure the base cover: Schritt 21, Bild 3 von 3

    • Align the base cover to the chassis and lay it in place.

    • Press firmly along the sides and corners of the base cover to reengage the clips.

    Übersetzen

  23. Lenovo ThinkPad P1 Gen 7 LPCAMM2 Memory Replacement, Secure the base cover: Schritt 22, Bild 1 von 1

    • Use a Phillips screwdriver to tighten the six captive screws to re-secure the base cover.

    Übersetzen
Abschluss

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.

5 weitere Nutzer:innen haben diese Anleitung absolviert.

Autor:in

mit 3 anderen Mitwirkenden

Arthur Shi

Mitglied seit: 01/03/18

255.296 Reputation

529 Anleitungen geschrieben

Auszeichnungen: 47

+ 44 weitere Auszeichnungen

Team

iFixit Mitglied von iFixit

Staff

137 Mitglieder

17.524 Anleitungen geschrieben

Ein Kommentar

Thank you, iFixit, for the detailed, easy-to-understand repair guide on the new, revolutionary LPCAMM2 memory on the ThinkPad P1 Gen 7.

Rijul Razdan - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 136

Letzte 7 Tage: 1,376

Letzte 30 Tage: 11,936

Insgesamt: 12,061