How to on Bluetooth system
how to connect phone with Bluetooth of car
Ansicht:
Ausstehende AbstimmungenJeder mit mehr als 20 Reputationspunkten kann problematische Kommentare und Beiträge melden.
(2 / 5 Stimmen)
Details anzeigen
Jeder mit mehr als 20 Reputationspunkten kann problematische Kommentare und Beiträge melden.
Rep: 1
Veröffentlicht:
how to connect phone with Bluetooth of car
(2 / 5 Stimmen)
Details anzeigen
Jeder mit mehr als 20 Reputationspunkten kann problematische Kommentare und Beiträge melden.
Rep: 25
Veröffentlicht:
Keeps touching itself
Rep: 57,8 Tsd.
Veröffentlicht:
Hi Mathew,
"Ghost touches" as the problem you're having is described, is a result of the phone's processor getting bad data from the digitizer, or touch screen. It's usually a result of a damaged touch screen, as there are delicate connections between the flex cable that goes to the logic board and the glass on which the digitizer circuitry is printed. The glass does not have to be cracked for the touch screen to fail; it's frequently the case that no damage is visible at all.
It is possible for the problem to be located on the motherboard, but since those issues are generally not repairable by us normal home DIY-ers, let's stick to the part we can fix, the screen.
The best chance you have to fix this yourself is to replace the screen, but there are certainly things you can do to try and diagnose the problem before you go ahead and order a replacement screen. Unfortunately you'll have to open up the phone to check those things out. You can disconnect the screen connector, clean it with 90% or higher isopropyl alcohol and reseat it firmly. If that doesn't help, then it's probably time to replace the screen. For that some instructions would be nice; unfortunately iFixit doesn't have a guide for you, but there's a German site called iDoc that does.
Samsung Galaxy A13 screen replacement - repair guide
Good luck; let us know what you find!
(4 / 5 Stimmen)
Details anzeigen
Jeder mit mehr als 20 Reputationspunkten kann problematische Kommentare und Beiträge melden.
Rep: 1
Veröffentlicht:
This is the first time i’m doing this, but i’m gonna need to replace the back cover of my HP pavillion. This is mostly due to a crack that started forming a few months ago and i’m scared the screen might pop off. Is there a guide avalible to help me? I’m also not really sure over tools, so if anyone could give any suggestions, i’ll take them gladly.
For specifications, this is the specific model: HP Pavillion x360 Convertible 15-cr0xx.
Thank you for your time.
Edit: I wasn’t so specific in my question, so i’ll add some extra details. The part that needs replacing is the back of the LCD screen. Also. this is the best image i can find of the damage
Rep: 450,6 Tsd.
Veröffentlicht:
Hi @roshiroshi ,
If you meant the cover on the back of the display panel, then you may be out of luck.
Looking at the maintenance and service guide for the laptop, taken from this webpage the cover is bonded to the display panel.
On p.42 it shows how to remove the display assembly and it states that The display assembly is spared only as an entire hinge-up. Display sub components are not spared.
If you meant the base enclosure (see p.15 item #22) then the manual will help you to disassemble the laptop so that it can be replaced. The part number is L20812-001. To find suppliers of the part, search online using the part number only.
(4 / 5 Stimmen)
Details anzeigen
Jeder mit mehr als 20 Reputationspunkten kann problematische Kommentare und Beiträge melden.
Rep: 1
Veröffentlicht:
Hallo zusammen
Habe bei einem Duplexdruck vergessen, den Stoff, der oben auf dem Drucker lag abzunehmen. Darum gabs Papierstau.
Ich habe schon oft Papierstau entfernt. Diesmal hat es nicht geklappt.
Ich kann das Papier sehen, wenn ich die hintere Klappe öffne. Ich konnte auch Teile davon rausziehen, manches mit Pinzette. Dabei habe ich bereits ein kleines orangefarbenes weiches Stück von einer Rolle erwischt. Das Papier klemmt zu weit Innen fest, hinter den weissen Rollen.
Um meinen Drucker nicht weiter zu verletzen, möchte ich ihn nun so weit auseinander nehmen, dass ich das Papier entfernen kann.
Und danach möchte ich ihn wieder zusammen gesetzt bekommen.
Gibts dazu eine Anleitung? Das wäre Klasse!
Gruss, Barbara
Rep: 22,6 Tsd.
Veröffentlicht:
Hier ist die Werkstattanleitung für deinen Drucker. Ab Seite 156 wird gezeigt, wie der Drucker auseinandergebaut wird. Das müsste dir helfen.
(4 / 5 Stimmen)
Details anzeigen
Jeder mit mehr als 20 Reputationspunkten kann problematische Kommentare und Beiträge melden.
Rep: 1
Veröffentlicht:
Hi,
I’m wondering if anyone can help. We have an LG 55UH850V. The tv has a problem where the screen goes black and the sounds stays on, when looking at with a torch you can see an image. I have replaced the edge lit backlight and changed the power board but still have the same issue. Can anyone point me in the direction of what to try next? Could it be I’ve installed a faulty backlight? The metal strip at the bottom of the tv (where the backlight is) seems to get really hot. Should a backlight be hot? Could the main board also cause this issue?
Thanks in advance for any replies.
=== ===
Rep: 450,6 Tsd.
Veröffentlicht:
Hi @lewyb
With some LG TVs there is an inverter board associated with the LCD panel i.e. part of the panel but I don’t know about your model.
Here’s a link to the service manual for your TV (I think). The translation seems to indicate that it is. It is a .rar type file and I haven’t downloaded it to check but maybe scan it for viruses first before opening it, just to be sure.
Usually LG service manuals have good troubleshooting flowcharts and some schematics to help find problems such as no video etc.
Hopefully this is of some help.
Ups! Ich will meine Meinung nochmal ändern.
Erweitern / Reduzieren
Bestätigen
Positiv
Ablehnen
Negativ
Hilfe öffnen
Seite 1 von 1